TB-9-2350-368-25 Powerplant Test Stand M113A2 M113A3 M548A1 M548A3 Download
Page 23 of 120
TB 9-2350-368-25 2-9 c. Transmission Mount (M113A3/M548A3) Bill Of Materials Item Nomenclature Part Number NSN Qty 4” by 3” by 1/4” Steel Angle 1 27 inches (68.6 cm) 1 1/2” Steel Plate 2 4-1/2 by 5-1/2 inches (11.4 by 14.0 cm) 2 1/2” Rubber Pad 3 3 by 26 inches (7.6 by 66.0 cm) 1 1. Cut steel angle (1) so that it measure 3 inches (7.6 cm) and 4 inches (10.2 cm) per Figure 2-7. The 3-inch length should face forward. 2. Cut two side guides (2) and weld to steel angle (1), cut away external material from two guides (2) inside of steel angle (1). 3. Rubber pad (3) may be layered or a single thickness of 3 inches (7.6 cm). Figure 2-7. Transmission Mount Fabrication—M113A3/M548A3 FOV