TB-9-2350-277-40&P-4 M121 M1064A3 Crew Modification Kit Volume 4 Download
Page 42 of 100
TB 9-2350-277-40&P-4 INSTALLATION PROCEDURES – Continued 0005 00 0005 00-6 6. Install new gasket (15) on GPS mounting bracket (14). NOTE If SINCGARS antenna was previously mounted, do Step 7. If carrier had no antenna, go to Step 8. 7. Install SINCGARS antenna on vehicle. a. Reroute antenna cable (7) inside vehicle and through antenna opening, GPS mounting bracket (14), and gasket (15). Connect antenna cable (7) to antenna base (3). NOTE SINCGARS antenna requires four screws (P/N B1821BH038C175N). b. Install SINCGARS antenna base (3) over gasket (15), GPS mounting bracket (14), and antenna opening. Secure with four screws (18) and retained lockwashers (1). TORQUE SCREWS TO 44 LB-FT (59.6 N·m). c. Connect ground strap (8) to vehicle hull and secure with retained bolt (6) and two lockwashers (5). Figure 5. SINCGARS Antenna Installation