TB-9-2350-277-40&P-4 M121 M1064A3 Crew Modification Kit Volume 4 Download
Page 38 of 100
TB 9-2350-277-40&P-4 INSTALLATION PROCEDURES – Continued 0005 00 0005 00-2 1. Remove SINCGARS antenna from vehicle. a. Remove bolt (6), two lockwashers (5), and ground strap (8) from inside vehicle. Retain hardware for re-installation after modification. b. Disconnect cable (7) from antenna base (3). c. Remove four screws (2), lockwashers (1), antenna base (3), and gasket (4) from vehicle. Discard screws and gasket. Retain antenna base and lockwashers for re-installation after modification. 2. Scrape any remaining gasket material from mating surface. Clean with cleaning compound. Figure 1. SINCGARS Antenna Removal