TB-9-2350-277-40&P-4 M121 M1064A3 Crew Modification Kit Volume 4 Download
Page 26 of 100
TB 9-2350-277-40&P-4 REMOVAL PROCEDURES – Continued 0003 00 0003 00-2 REMOVE APU CONTROLLER MOUNTING HARDWARE NOTE Do not remove APU controller. Only remove hardware as instructed. For M577A3, do Step 1 only. For M1068A3, do Steps 1 and 2. 1. Remove two screws (7), lockwashers (8), and flat washers (9) from the two lower APU controller (6) mounting positions. Discard hardware. 2. Remove screw (7), lockwasher (8), and flat washer (9) from upper right APU controller (6) mounting position. Discard hardware. Figure 2. APU Controller Mounting Hardware Removal