TB-9-2350-277-40&P-3 M121 M1064A3 Crew Modification Kit Volume 3 Download
Page 33 of 88
TB 9-2350-277-40&P-3 MODIFICATION PROCEDURES – Continued 0004 00 0004 00-5/6 blank NOTE Do not secure cables with tie straps until installation is complete and the cables have been adjusted at both ends. 3. Route SINCGARS antenna cable (8) from radio unit up the turbine housing wall to the roof. 4. Continue routing cable (8) along exiting wiring harness and around the front of the turbine housing to the right front of the vehicle and through new hull opening (9). 5. Secure cable (8) to existing wiring harness with tie strap (10). 6. Loop excess cable (8) at hull opening and secure with tie strap (10). Figure 4. SINCGARS Antenna Cable Routing After Modification END OF WORK PACKAGE