TB-9-2350-277-40&P-3 M121 M1064A3 Crew Modification Kit Volume 3 Download
Page 25 of 88
TB 9-2350-277-40&P-3 REMOVAL PROCEDURES 0003 00 0003 00-1 THIS WORK PACKAGE COVERS: Remove SINCGARS Antenna (page 0003 00-1). Remove Floor Plate and Hopper Baseplate Assembly Hardware (page 0003 00-2). Remove Radio Rack Hardware (page 0003 00-3). INITIAL SETUP: Maintenance Level Sustainment Tools and Special Tools General Mechanic’s Tool Kit (WP 0011 00, Item 4) Materials/Parts Cleaning Compound (WP 0013 00, Item 1) Personnel Required Mechanic Equipment Conditions Carrier parked on level ground Engine stopped (TM 9-2350-277-10) Vehicle blocked (TM 9-2350-277-10) Radio and mount removed (TM 11-5820-498-12) REMOVE SINCGARS ANTENNA 1. Remove bolt (6), two lockwashers (5), and ground strap (8) from inside vehicle. Retain hardware for re-installation after modification. 2. Disconnect cable (7) from antenna base (3). 3. Remove four screws (2), lockwashers (1), antenna base (3), and gasket (4) from vehicle. Discard screws and gasket. Retain antenna base and lockwashers for re-installation after modification. 4. Scrape any remaining gasket material from mating surface. Clean with cleaning compound. Figure 1. SINCGARS Antenna Removal