TB-9-2350-277-40&P-2 M121 M1064A3 Crew Modification Kit Volume 2 Download
Page 40 of 100
TB 9-2350-277-40&P-2 INSTALLATION PROCEDURES – Continued 0006 00 0006 00-2 1. Remove SINCGARS antenna from vehicle. a. Remove bolt (6), two lockwashers (5), and ground strap (8) from inside vehicle. Retain hardware for re-installation. b. Disconnect cable (7) from antenna base (3). c. Remove four screws (2), lockwashers (1), antenna (3), and gasket (4) from vehicle. Discard screws and gasket. Retain antenna and lockwashers for re-installation. 2. Scrape any remaining gasket material from mating surface. Clean with cleaning compound. Figure 1. SINCGARS Antenna Removal