TB-9-2350-277-40&P-2 M121 M1064A3 Crew Modification Kit Volume 2 Download
Page 39 of 100
TB 9-2350-277-40&P-2 INSTALLATION PROCEDURES 0006 00 0006 00-1 THIS WORK PACKAGE COVERS: Install GPS Kit (page 0006 00-1). Install GPS Antenna Riser (page 0006 00-8). Install Power Plant Upper Rear Access Panel (page 0006 00-9). Install RCU/PDA Bracket Assembly (page 0006 00-10). Install RCU/PDA Cable Clamps and Commander’s Intercom Unit (page 0006 00-11). Install Primary Unit Bracket Assembly (page 0006 00-13). Install GPS Antenna Cable Clamps and Power Harness Clamps (page 0006 00-14). Install GPS Antenna Cables (page 0006 00-15). Install Power Harness, RCU Cable, RCU to PDA Cable, and GPS Cable (page 0006 00-16). INITIAL SETUP: Maintenance Level Sustainment Tools and Special Tools General Mechanic’s Tool Kit (WP 0012 00, Item 5) Torque Wrench (WP 0012, Item 11) Materials/Parts Cleaning Compound (WP 0014 00, Item 1) Crew II Modification Kit (12498026) Personnel Required Mechanic Equipment Conditions Carrier parked on level ground Engine stopped (TM 9-2350-277-10) Vehicle blocked (TM 9-2350-277-10) INSTALL GPS KIT NOTE If the carrier has a SINCGARS antenna mounted, do Steps 1-2. If carrier has no antenna, go to Step 3.