TB-9-2350-277-40&P-2 M121 M1064A3 Crew Modification Kit Volume 2 Download
Page 36 of 100
TB 9-2350-277-40&P-2 MODIFICATION PROCEDURES – Continued 0005 00 0005 00-6 DRILL CREW II ENGINE BULKHEAD CABLE CLAMP 1. Locate and mark for hole (11) on engine bulkhead, measuring from inside of hull roof edge (9) and from inside of right side hull edge (10). 2. Drill a hole using a 1/4 inch drill thru engine bulkhead hull. Figure 5. Location for CREW II Engine Bulkhead Cable Clamp