TB-9-2350-277-40&P-1 M121 M1064A3 Crew Modification Kit Volume 1 Download
Page 53 of 100
TB 9-2350-277-40&P-1 INSTALLATION PROCEDURES – Continued 0005 00 0005 00-17 WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 4. Apply sealing compound primer to threads of screws (83) and (81). 5. Apply sealing compound to four screws (83). While sealing compound is still wet, secure four corners of enclosure assembly (79) to CREW II mount assembly (1) using four screws (83), lockwashers (16), and washers (15). 6. Apply sealing compound to two screws (81). While sealing compound is still wet, attach enclosure assembly (79) to tank mount support (20) with two screws (81), lockwashers (16), and washers (15). 7. Remove endless sling (80). Figure 16. Enclosure Assembly Installation