TB-9-2350-277-40&P-1 M121 M1064A3 Crew Modification Kit Volume 1 Download
Page 28 of 100
TB 9-2350-277-40&P-1 REMOVAL PROCEDURES – Continued 0003 00 0003 00-4 REMOVE SINCGARS ANTENNA/ANTENNA COVER NOTE If carrier has a SINCGARS antenna mounted, do Steps 1-4. If carrier has no antenna, go to Step 5. 1. Remove four screws (24) and lockwashers (31) from antenna base (25). 2. Lift antenna base (25). Remove screw (28), lockwasher (27), and disconnect antenna ground wire (26). Discard lockwasher. 3. Disconnect antenna cable (30) from antenna base (25). 4. Remove antenna base (25) and gasket (29). Discard gasket. Scrape any remaining gasket material from mating surface and clean with cleaning compound. Figure 3. SINCGARS Antenna Removal