TB-9-2350-277-40&P-1 M121 M1064A3 Crew Modification Kit Volume 1 Download
Page 27 of 100
TB 9-2350-277-40&P-1 REMOVAL PROCEDURES – Continued 0003 00 0003 00-3 REMOVE FUEL TANK ANGLE BRACKETS NOTE If angle bracket is welded to fuel access cover, it is considered an unauthorized modification and the fuel cover and bracket must be replaced. Refer to TM 9-2350-277-24P and TM 9-2350-277-20-2. 1. Remove two screws (19), lockwashers (20), washers (21) and angle bracket (22) from left fuel tank (15). Save angle bracket for reinstallation. Discard screws, lockwashers, and washers. 2. Remove three screws (18), lockwashers (17), and washers (16) from left fuel tank access cover (23). Discard screws, lockwashers, and washers. Figure 2. Fuel Tank Angle Bracket Removal