TB-9-2350-277-40&P-1 M121 M1064A3 Crew Modification Kit Volume 1 Download
Page 26 of 100
TB 9-2350-277-40&P-1 REMOVAL PROCEDURES – Continued 0003 00 0003 00-2 NOTE Tag leads for identification to aid in installation. 1. Disconnect left side stoplight-taillight circuit 21 lead (7), circuit 22 lead (8), and circuit 24 lead (9) from stoplight-taillight (13). NOTE If vehicle is equipped with bar armor, removal of upper left fuel tank support, four screws, flat washers, and two lock washers is required prior to continuing. 2. Remove two screws (4), lockwashers (3), and washers (2) from top of mounting bracket (1). 3. Remove bottom two screws (12), lockwashers (11), washers (10), and mounting bracket (1) with stoplight-taillight (13) from carrier. 4. Remove two screws (6) and lockwashers (5) from stoplight-taillight (13). Separate stoplight- taillight (13) and gasket (14) from mounting bracket (1). 5. Retain stoplight-taillight and gasket for installation, return mounting bracket to supply. Discard all screws, lockwashers, and washers. Figure 1. Stoplight-Taillight Mounting Bracket Removal