TB-9-2350-277-40&P-1 M121 M1064A3 Crew Modification Kit Volume 1 Download
Page 21 of 100
TB 9-2350-277-40&P-1 EQUIPMENT DESCRIPTION – Continued 0002 00 0002 00-3 KEY NOMENCLATURE FUNCTION 1 CREW II Mount Assembly Supports primary unit located above exterior fuel storage tank at left rear of carrier. 2 Remote Control unit (RCU)/Personal Digital Assistant (PDA) Assembly Supports the RCU and PDA cradle. The PDA cradle provides hands-free operation of the PDA while the operator is in the carrier. It can also be used for charging the PDA main battery and the PDA internal memory battery. Power is provided via the vehicle power cable. 3 Antenna Bracket Stows and secures CREW II antenna when not in use. 4 CREW II Global Positioning System (GPS) Mount Provides the GPS antenna and exterior bracket with hardware to mount the GPS antenna. 5 Enclosure Assembly Provides ballistic and environmental protection to the CREW II primary unit necessary with exterior mounting. 6 Power Harness Provides power to the carrier cradle from the carrier power source. It contains a 5 amp in-line circuit breaker. The circuit breaker provides over-current protection to the PDA. If the circuit breaker trips due to over-current condition, the circuit breaker can be reset. 7 RCU Cable Main interface cable between CREW II Primary Unit located in the rear of the carrier and the RCU. 8 Tactical PDA Cable Connects the RCU interface cable to the RCU. This cable is used when the PDA is being operated in the PDA (carrier) cradle (2) or desktop cradle. 9 GPS Cable Provides GPS positioning data from the GPS sensor to the CREW II Primary Unit.