LO-9-2350-247-12 Lubrication Order for M548A1 M548A3 M1015A1 Download
Page 8 of 43
KEY LUBRICANTS/COMPONENTS REFILL EXPECTED TEMPERATURES* CAPACITY INTERVALS (APPROX) +5°F to +120°F +40°F to -60°F OE/HDO (MIL-L-2104D) LUBRICATING OIL 40 qt. or OE/HDO-15/40 OEA AF - After OR OEA (MIL-L-46167) INTERNAL COMBUSTION 10 gal. ENGINE S - Semi-annual (MIL-L-21260) Transmission PE 30-1 AN - Annually or Every 1,500 PRESERVATION OIL (See Note 11) Miles OC - On Condition For Arctic Operation Refer to FM 9-207 NOTES 1. TRANSMISSION OIL FILL. OE/HDO 15/40 MUST 5. HARD TIME INTERVAL. If AOAP Laboratory is NOT be mixed with single grade lubricants. not available, every 1,500 miles or annually, drain oil, change filter. Hard time interval may be shortened if 2. A complete oil and filter change is required when you are operating the equipment under adverse converting to a different grade of oil in accordance with conditions. Temperature Key Chart. 6. TRANSMISSION OIL FILTER. Replace filter CAUTION element and packings each time a transmission oil Transmission can be damaged when filled above change is required. When AOAP Laboratory support FULL mark. is not available, change transmission oil filter annually, or every 1,500 miles, or when transmission differential 3. TRANSMISSION OIL LEVEL. After operation, pressure light comes on (filter clogged). check transmission oil level. Oil level should be at FULL mark on gauge rod. When oil is warm, oil level 7. OIL FILTER REMOVAL AND INSTALLATION should be at or just above ADD mark on gauge rod. INSTRUCTIONS (TM 9-2350-247-20). 4. FREQUENCY OF AOAP SAMPLE. Every 30 days, obtain a sample of transmission oil. Samples should be taken as near the prescribed interval as possible. If sampling at the prescribed interval is not possible, a 10 percent variance is permissible. Card 8 of 40