LO-9-2350-247-12 Lubrication Order for M548A1 M548A3 M1015A1 Download
Page 17 of 43
LUBRICATION ORDER LO 9-2350-247-12 8 JULY 1994 (Supersedes LO 9-2350-247-12, March 1982) KEY REFILL EXPECTED TEMPERATURES* LUBRICANTS/COMPONENTS CAPACITY INTERVALS (APPROX) +5°F to +12°F GIA (MIL-G-23827) GREASE, INSTRUMENT, As Required All Temperatures AN - Annually or AIRCRAFT Every 1,500 GAA (MIL-G-10924) GREASE, AUTOMOTIVE Miles AND ARTILLERY S - 150 Hours, OE/HDO (MIL-L-2104D) LUBRICATING OIL, 1,500 Miles OR OEA (MIL-L-46167) INTERNAL COMBUSTION or Semi-annually ENGINE For Arctic Operation Refer to FM 9-207 NOTES 1. TACHOMETER AND SPEEDOMETER SHAFTS. 2. OIL CAN POINTS. Every 1,500 miles, semi- Annually, disconnect shafts at both ends (TM 9-2350- annually, or as required, lubricate fan tensioner, door, 247-20), remove slotted washers from drive ends of tailgate hinges and latches; control linkage pins and cores, and remove cores from instrument panel end of shafts, and seat control. Use oil (OE/HDO or OEA). shafts. Clean and lubricate cores with grease (GIA) and insert cores in shafts. Install slotted washers and 3. LUBRICATED AT TIME OF ASSEMBLY. Coat connect both ends of shafts. If tacho- ends of suspension torsion bar, idler wheel support meter adapter has a grease fitting, lubricate with arm spindle and bearings, steering control linkage lubricant GIA sparingly. bearing surfaces and pins, and towing pintle shaft. Use grease (GAA or GIA) as specified during assem- bly procedure. Card 17 of 40