LO-9-2350-247-12 Lubrication Order for M548A1 M548A3 M1015A1 Download
Page 37 of 43
LUBRICATION ORDER LO 9-2350-247-12 8 JULY 1994 (Supersedes LO 9-2350-247-12, March 1982) KEY EXPECTED REFILL TEMPERATURES* LUBRICANTS CAPACITY Above +40°F 0°F INTERVALS (APPROX) 32°F to to -10°F -65°F PL-M (MIL-L-3150) LUBRICATING OIL, As Required GENERAL PURPOSE AN - Annually Medium or Every 1,500 Miles PL-S (VV-L-800) LUBRICATING OIL, PL-M PL-S PL-S GENERAL PURPOSE S - 150 Hours, Special 1,500 Miles Machine Gun Mount As Required or Semi-annually CLP (MIL-L-63460) CLEANER, LUBRICANT AND PRESERVATIVE As Required CLP CLP CLP GAA (MIL-G-10924) GREASE AUTOMOTIVE AND ARTILLERY As Required All Temperatures Towing Pintle *For Arctic Operation Refer to FM 9-207 NOTES 1. *CLP is an alternate for PL-M and PL-S. NOTE Late model towing pintles do not have grease WARNING fittings and do not require lubrication. Dry cleaning solvent PD-680 is toxic and flam- mable. Death or injury may result. Always use in an 2. TOWING PINTLE. Every 1,500 miles or annually, open area with good air flow, away from sparks, lubricate pintle through two fittings with grease (GAA). heat, or flames. Wear protective goggles and gloves. Towing pintle is at rear of carrier. Do not breathe vapors. Avoid contact with skin, eyes, and clothes. If you get dizzy while using solvent, breathe fresh air and get medical help. If solvent gets on hands, wash them. If solvent gets in eyes, flush eyes with fresh water and get medical help immediately. Keep fire extinguisher nearby. NOTE Clean grease fittings with dry cleaning solvent (PD- 680, Type Ill, or equivalent) prior to lubrication. Check/lubricate grease fitting points after washing or fording. Card 37 of 40