LO-9-2350-247-12 Lubrication Order for M548A1 M548A3 M1015A1 Download
Page 36 of 43
3. WINCH GEAR BOX (M548A1/M1015A1). Service 4. WINCH WIRE ROPE (M548A1/M1015A1). Ser- only when contaminated or during maintenance repair. vice only when contaminated after use or during Drain and refill winch gear box. To drain, remove plug in maintenance repair. Pay out winch wire rope from bottom of gear box. Inspect plug and oil for metallic drum. Clean wire rope with oil (OE/HDO), wipe off particles. If found, notify your supervisor. Clean plug, excess oil, and coat with oil (CW-11). Reel in wire apply a coat of sealing compound* to plug threads, and rope. install plug. To fill, remove fill and level plugs and add gear lubricant (GO) until lubricant reaches bottom of level plug hole (refill capacity 2 3/4 pints). Clean plugs, apply a coat of sealing compound* to plug threads, and install plugs. On M1015A1 carriers, it will be neces- sary to remove ground rod stowage box (TM 9-2350- 247-20) before draining winch gear box. Machine Gun Mount (Clean with dry cleaning solvent; oil all moving parts)(see note 1) (O) LUBRICANT INTERVAL Towing Pintle (2 Fittings) (see note 1) (O) Use sealing compound - 8030-00-543-4384 antiseize compound - 8030-00-286-5453, or Permatex - 5330-00-252-3391. Card 36 of 40