LO-9-2350-247-12 Lubrication Order for M548A1 M548A3 M1015A1 Download
Page 25 of 43
LUBRICATION ORDER LO 9-2350-247-12 8 JULY 1994 (Supersedes LO 9-2350-247-12, March 1982) KEY REFILL EXPECTED TEMPERATURES* LUBRICANT/COMPONENTS CAPACITY INTERVALS (APPROX) GAA (MIL-G-10924) GREASE, AUTOMOTIVE As Required AND ARTILLERY Tow Pintle and Universal Joint All Temperatures S - 150 Hours, 1,500 Miles or Semi-annually *For Arctic Operation Refer to FM 9-207 NOTES 1. UNIVERSAL JOINTS (M548A3). Every 1,500 WARNING miles or semi-annually, lubricate four universal joints Dry cleaning solvent PD-680 is toxic and flam- through four fittings with grease (GAA). Universal mable. Death or injury may result. Always use in joints are on ends of propeller shafts. an open area with good air flow, away from sparks, heat, or flames. Wear protective goggles and 2. UNIVERSAL JOINTS (M548A1/M1015A1). Every gloves. Do not breathe vapors. Avoid contact with 1,500 miles or semi-annually, lubricate all universal skin, eyes, and clothes. If you get dizzy while using joints and propeller shaft bearings with grease (GAA) solvent, breathe fresh air and get medical help. If (12 places). Each universal joint spider has two fit- solvent gets on hands, wash them. If solvent gets tings, but only one of each pair of fittings requires in eyes, flush eyes with fresh water and get medi- lubrication. cal help immediately. Keep fire extinguisher nearby. 3. When grease fittings will not accept GAA, notify unit maintenance. 4. Clean grease fittings with dry cleaning solvent (PD-680, Type Ill, or equivalent) prior to lubrication, Check/lubricate grease fitting points after washing or fording. Card 25 of 40