LO-9-2350-247-12 Lubrication Order for M548A1 M548A3 M1015A1 Download
Page 21 of 43
LUBRICATION ORDER LO 9-2350-247-12 8 JULY 1994 (Supersedes LO 9-2350-247-12, March 1982) KEY REFILL EXPECTED TEMPERATURES* LUBRICANTS/COMPONENTS CAPACITY INTERVALS (APPROX) +5°F to +120°F +40°F to -60°F GAA (MIL-G-10924) GREASE, AUTOMOTIVE As Required AND ARTILLERY Steering Control All Temperatures S - 150 Hours, Bearing 1,500 Miles Foot Brake Pedal or Semi-annually Linkage For Arctic Operation Refer to FM 9-207 NOTES WARNING NOTE Dry cleaning solvent PD-680 is toxic and flam- When grease fittings will not accept GAA, notify mable. Death or injury may result. Always use in unit maintenance. an open area with good air flow, away from sparks, heat, or flames. Wear protective goggles and 2. FOOT BRAKE PEDAL LINKAGE (M548A3). Every gloves. Do not breathe vapors. Avoid contact with 1,500 miles or semi-annually, lubricate linkage with skin, eyes, and clothes. If you get dizzy while using grease (GAA) through fitting. Use grease gun with solvent, breathe fresh air and get medical help. If flexible adapter. solvent gets on hands, wash them. If solvent gets in eyes, flush eyes with freshwater and get medi- cal help immediately. Keep fire extinguisher nearby. NOTE CIean grease fittings with dry cleaning solvent PD-680, Type III, or equivalent) prior to lubrica- tion. Check/lubricate grease fitting points after washing or fording. 1. STEERING CONTROL BEARINGS (M548A3). Every 1,500 miles or semi-annually, lubricate bearings with grease (GAA) through fitting at each end of steering control. Use grease gun with flexible adapter. Remove forward battery under driver’s seat (TM 9- 2350-247-20). Card 21 of 40