TM-9-6015 Aiming Post Lights M14, M41 and M43 Download
Page 41 of 54
Section Ill. AIMING POST LIGHT 25. Test r Disassembly, Rebuild, and Assembly M41 Follow procedures described for aiming post light M14, given in paragraphs 21, 22, 23, and 24. 26. Differences-Aiming Post Light M41 Refer to table II for differences between aiming post light M41 and other models. A“otf. onlj- one Ikittery is llsecl in this (Init. Therefore, OII]Y 011(? I):ltteI’y (’ont:i(t :th, seml)ly is provi(lfxl in the (w, se, and the wiritlx nrr:ln:wment differs ;1s ,shown in figures 11 and 12. otherwise, assembly :Ind dis:lsselnhly of the unit is identical with aiming l)ost light M14. 27. Interchangeability-Aiming Post Light M41 Aiming post light M41 is equipped with a green filter only and a black opaque window (K of fig. 19) with a clear center strip which may not be used with other lights. Section IV. AIMING POST LIGHT M43 28. Test, Disassembly, Rebuild, and Assembly Follow procedures described for aiming post light M14, described in paragraphs 21, 22, 23, and 24. 29. Interchangeability-Aiming Post Light M43 With the exception of the case, all parts used in this unit are inter- changeable with parts used in other models. The reflector disk (L, fig. 20) is used only in aiming post light M43 (fig. 20) and is not installed into other models. 35