Sign up to sell your inventory with NSN Lookup

TM-9-2920-258-30&P Technical and Parts Manual for 5520AB Generator Download

Page 29 of 76

TM 9-2920-258-30&P Insert terminal cover (40) and pull jumper connector (39) into place against S.R. end housing (1). Secure in place with two screws (36), two Iockwashers (37), two screws (38) and two Iockwashers (37). Align jumper connector (39) and connector assembly (41). Secure in place with four Iockwashers (35) and four screws (34). NOTE Install brush lead away from brush spring. 6 Insert four brushes (8) partially into brush rigging assembly (31). Install tabbed Iockwasher (29), two brush leads (8), terminal lead (28), Iockwasher (27) and nut (26) onto existing stud of brush rigging assembly (31). Close tabbed Iockwasher over nut. Repeat for opposite side. 7 Place bearing retainer (25) onto end of S.R. end housing (1). Secure in place with three screws (24). 3-17 4 5