TM-9-2920-225-34 Technical Manual for Generators AMA5102UT 3002AC and 3002AD Download
Page 64 of 262
TM 9-2920-225-34 g.Replacement. FRAME 1 1. Hold rotor (1) and housing (2). 2. Press drive end bell (3) and preformed packing (4) onto rotor shaft (1). 3. Put in six screws (5). 4. Put on spacer (6), guard washer (7) and nut (8). 5. Turn rotor shaft (1) and check that there is no binding 6. If there is any binding or scraping, do steps 1 through END OF TASK or scraping. 5 again.