TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 94 of 670
TM 9-2815-202-34 3-11. TURBOCHARGER OIL SUPPLY, LINE REMOVAL/lNSTALLATION (MODELS 7083-7395 AND 7083-7398) This task covers: a. Removal b. Installation INITIAL SETUP MODELS TOOLS AND SPECIAL TOOLS 7083-7395 7083-7398 General mechanics tool kit (App B, Item 96) a. Removal (1) Disconnect turbocharger oil supply line (1) at turbocharger connector (2) and at elbow connector (3) on left rear of engine block. NOTE Model 7083-7398 does not have clips securing turbocharger oil supply line. (2) Remove two bolts (4) and two Iockwashers (5) securing oil supply line clips (6) to engine. Reinstall two bolts and two Iockwashers that secure clips. (3) Remove turbocharger oil supply line (1) with clips attached. b. Installation NOTE On model 7083-7395, the end of the oil supply with the 90 degree fitting is connected at the turbocharger. (1) (2) (3) Connect turbocharger oil supply line (1) to turbocharger connector (2) and engine block connector (3). Secure oil supply line (1) to engine using two bolts (4) and two Iockwashers (5) to fasten clips (6). Tighten oil supply line (1) pipe fittings at connectors (2 and 3). END OF TASK 3-36