TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 77 of 670
TM 9-2815-202-34 (r) Install oil gage rod (if missing, tape the tube opening closed). (s) Apply a light coat of grease to front and rear exposed portions of the crankshaft and any other exposed machined surface. c. Installation NOTE Do not forward an unserviceable engine missing components or down parts. .For models 7083-7396 and 7083-7399, if installed, crankshaft damper must be removed from engine and secured in container prior to engine installation in container (Refer to Para 5-27 for damper removal). Crankshaft damper must be protected and secured in container during shipment. (1) Attach U-shaped bracket (13), to front of engine using four existing (on engine) bolts (30), four flat washers (31), and four Iockwashers (32). NOTE Allow brackets to fit loosely so adjustment is possible. (2) Attach rear mounting bracket (20), (with the 2 inch radius cutout on starter side of engine) to flywheel end using six bolts (33), two bolts (34), ten flat washers (35), eight Iockwashers (36), and two nuts (37). (3) On models 7083-7396 and 7083- 7399 only, secure bracket (41 ) to turbocharger side of engine with two bolts (38), two flat washers (40), and two Iockvvashers (39). Change 1 3-23