TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 68 of 670
TM 9-2815-202-34 3-3. ENGINE FROM/TO CONTAINER - 12268285 (Cont) (4) Attach rear mounting bracket (18) (with the 2 inch radius cutout on starter side of engine) to flywheel end using two bolts (28), and two bolts (29), six flat washers (30), four Iockwashers (31), and two nuts (32). WARNING Never crawl under equipment when performing maintenance unless equipment is securely blocked. Keep clear of equipment when it is being raised or lowered. Do not allow heavy components to swing while suspended by lifting device. Exercise extreme caution when working near a cable or chain under tension. Equipment may drop or shift and injury to personnel may result. NOTE Use three-legged sling to lift engine model 7083-7395. Use four-legged sling to lift engine models 7083-7391 and 7083-7396. (5) (6) • • (7) 3-14 Lower engine into container using a multi-leg sling (21). (20) Aline mounting brackets with holes in the container rails. NOTE On model 7083-7395, aline mounting brackets with holes on left and right container rails (front of container has nameplate. On models 7083-7391 and 7083-7396, aline mounting brackets with holes on front. Fasten front U-shaped bracket (12) to container rail (13), underside with two bolts (8) and two bevel washers (9). On upper side, secure with two Iockwashers (10), and two nuts (1 1). Change 1