TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 64 of 670
TM 9-2815-202-34 3-3. ENGINE FROM/TO • • (7) ● ● ● (8) (9) (10) 3-10 NOTE CONTAINER - 12268285 (Cont) Use the three-legged sling to lift engine models 7083-7395. Use four-legged sling to lift engine models 7083-7391 and 7083-7396. Remove engine from container (20), using a multi-leg sling (21). NOTE Always install upper section of the container on the bottom section and seal container with bolts, washers, and nuts after the engine has been removed. This action is necessary to avoid weather damage to interior of container. Only model 7083-7395 requires removal of fuel strainer in order to remove front U-shaped bracket. After removing four bolts and Iockwashers to four U-shaped brackets, install four bolts (1/2-13x4) and four Iockwashers, located in mailbag, in front engine cover. Place removed bolts (1/2-13x3-3/4) in mailbag. Discard used Iockwashers. Remove bolt (22) securing fuel strainer shell assembly (23) from adapter (24). Remove shell assembly. With engine supported by sling, remove four bolts (25), four flat washers (26), and four Iockwashers (27) securing U-shaped bracket (12) to front of engine. Discard Iockwashers. Remove two bolts (28 and 29), six flat washers (30), four Iockwashers (31), and two nuts (32) securing rear mounting bracket (18) to flywheel housing. Discard lockwashers. Change 1