TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 62 of 670
TM 9-2815-202-34 Section III. REMOVAL AND INSTALLATION OF ENGINE FROM CONTAINER 3-3. ENGINE FROM/TO CONTAINER - 12268285 This task covers: a. Removal b. Preservation c. Installation INITIAL SETUP MODELS 7083-7391 7083-7395 7083-7396 MANDATORY REPLACEMENT PARTS 37 Lockwashers (App F, Item 95) 4 Lockwashers (App F, Item 94) TOOLS AND SPECIAL TOOLS EXPENDABLE/DURABLE SUPPLIES General mechanics tool kit (App B, Item 96) Three-legged sling (App B, Item 84) Four-legged sling (App B, Item 82) Torque wrench (App B, Item 101) Desiccant bags (App C, Item 14) Seal (App C, [tern 35) Sealant (App C, Item 39) Preservation oil (App C, Item 31) Tape (App C, Item 27) Engine oil (App C, Item 16) Grease (App C, Item 22) a. Removal WARNING Wear safety glasses and stand clear of air release ports when purging air from reusable metal container. Make certain air pressure is fully vented before disassembly. Injury to eyes and inner ears can result from failure to properly vent containers before disassembly. (1) Release pressure in container by pressing air release button located at center of breather valve (1). (2) Remove twenty-eight bolts (2), twenty- eight Iockwashers (3), and twenty- eight nuts (4), from container. Discard Iockwashers. 3-8 Change 1