TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 584 of 670
TM9-2815=202=34 8-13. GOVERNOR BUFFER SCREW ADJUSTMENT Thistask covers: Adjustment ● INITIAL SETUP MODELS EQUIPMENT CONDITION Para Description 8-6 Bufferscrewbacked out TOOLS AND SPECIAL TOOLS General mechanics tool kit (App B, Item 96) Turbocharger Inlet shield (App B, Item 81) Adjustment a. b. c. Avoid avoid Wear WARNING contact with hot manifolds, pulleys, personal injury. proper ear protection when runnina and other moving parts to engine. Noise volume of engine can cause - hearing loss or in jury.- Protective turbocharger air inlet shield must be installed prior to doing maintenance when engine is running and ah’ inlet has been removed. Contact with rotating blades will cause injury to personnel. CAUTION Run engine in clean area when air intake ducting is removed. Dirt, dust, and particles in unfiltered air can enter engine and damage parts or cause mechanical failure. Start engine and operate until normal operating temperature is 165-185°F (71.1 -85. O”C). Place governor speed control lever (1) in IDLE position. Hold buffer screw (2) and loosen buffer screw locknut (3). 8-32 Change 1