TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 573 of 670
f. ● ● 9. h. i. j. Check the throttle delay setting. If 0.072 inch end of pin gage enters fill hole (7), tighten upper U-bolt nut (1 O). If 0.069 inch end will not enter fill hole (7) without resistance, tighten lower U-bolt nut (1 O). Insert 0.072 inch end of pin gage (6) in cylinder fill hole (7). Pin gage should not fit back in hole. Reverse pin gage (6) to 0.069 inch end and insert pin gage in cylinder fill hole (7). H should enter without resistance. Release throttle speed control lever (4) and remove timing gage (1) and pin gage (6). Move throttle speed control lever (4) from idle position to maximum speed position. There should be no binding in movement of control tube assembly (11 ). (’=--\ 4 * END OF FOLLOW. TASK -ON MAIN 1 TM9-2815-202-34 MAXIMUM SPEED ‘“x)%$ ‘ENANCE 10 6 “ 11 Para 4-11 Description Install rocker arm covers. 1 8-9 Adjust starting aid screw (7083-7391, 7083-7395, and 7083-7396). ● I 8-10 8-11 ● 8-12 8-13 Adjust idle speed. ‘ Install governor spring housing (Dual range limiting speed governor) (7083-7395 and 7083-7398). Install governor spring housing (Limiting speed governor) (7083-7391, 7083-7396, and 7083-7399). Adjust buffer screw. Change 1 8-21