TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 454 of 670
TM 9-2815-202-34 5-41. GOVERNOR REPAIR (Cont) (48) (49) (50) (51) (52) (53) (54) (55) Lubricate inside of two bushings (16) with grease. Place stop lever return spring (8) over boss on inner face of governor cover (2). Insert stop lever shaft (7) part way through hole in governor cover (2) and hook end of return spring (8) over end of lever. Push shaft up in cover. Position stop lever (7) against stop pin (91 ), opposite spring (8). Install seal ring (9), two washers (6), and retaining ring (5) securing stop lever to governor cover (2). Install speed control shaft (13) into governor cover (2) between two pins (92). Install seal ring (14), two washers (12), and retaining ring (11) securing speed control shaft to governor cover (2). Install spacer (10) on speed control shaft (13). NOTE If remote control levers were removed during disassembly of governor cover, reinstall levers. (56) Install governor cover (2) and gasket (4) on governor (3). Secure with eight screws (1) and tighten screws. END OF TASK FOLLOW-ON MAINTENANCE Para Description 5-17 Install governor on blower 5-42. WATER PUMP REPAIR (See para 4-43) 5-74