TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 447 of 670
(29) (30) (31) (32) (33) (34) (35) (36) (37) TM 9-2815 -202-34 Using an arbor press, remove carrier shaft (51) from weight carrier (44) by placing spline end into a sleeve (52) having a one-inch hole. Remove retaining clip (53) and washer (54) from differential lever pin (55) and remove operating lever connecting link (56). Remove retaining clip (57) and washer (58) from operating lever pin (59). Remove differential lever (60) from operating lever (61). If damaged, remove pin (55) from differential lever (60). For models 7083-7391 and 7083-7396, remove two springs (62) and two retainer clips (63). Separate governor links (64 and 65) and remove pin (66). Loosen locknut (67) and remove buffer screw assembly (68). Remove screw and washer assembly (69) and locking clip (70) securing operating lever shaft (71) to governor housing (3). Remove operating lever shaft (71), control link operating lever (72) and two washers (73). If bearings are damaged, support control link operating lever (72) on sleeve and rest sleeve on bed of arbor press. Place bearing remover (48) on top of bearing (74) and press two bearings (74) out of operating lever (72). Change 1 5-67