TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 431 of 670
TM9-2815-202-34 (h) Upset lower end of injector tube as follows: 1. 2. 3. Turn cylinder head bottom side up and remove insert pilot (96). Thread upsetting into tapped hole of installer (94). NOTE Reamer does not contact large diameter of current injector tube. Ream only at small inside diameter and injector nut seat. (i) Using socket and torque wrench, apply 30 Ib-ft (41 N-m) torque to upsetting die (98). Remove upsetting installer (94) from Ream injector tube as follows: die (98) 1. 2. Clean injector tube and place cylinder head right side up. Apply few drops of cutting oil on reamer flutes and carefully position reamer (99) in injector tube (95). Change 1 5-53