TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 364 of 670
TM 9-2815-202-34 4-42. GOVERNOR REPAIR (Cont) (13) (14) (15) (16) (17) Apply a thin coat of sealant to edge of expansion plug (82). Using a ballpeen hammer, tap expansion plug (82), convex side up, into governor housing (3). If removed, lubricate outside of two control link operating lever bearings (81) with engine oil and lubricate inside of bearings with grease. Using bearing installing tool (55), press one bearing (81), numbered side up, into control link operating lever (79) until flush with top of lever. Reverse operating lever and install second bearing in same manner. Insert control link operating lever (79) and two washers (80) between two bosses inside governor housing (3). Install operating lever shaft (78) with grooved end up. 4-256