TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 360 of 670
TM 9-2815-202-34 4-42. GOVERNOR REPAIR (Cont) (27) Matchmark two high speed and two low speed weights (49 and 50) to weight carrier (51). (28) (29) (30) (31) (32) (33) (34) (35) Remove four retaining rings (52). Press two pins (53) from weight carrier (51) and remove four washers (54), two high speed weights (49), and two low speed weights (50). Using bearing remover tool (55), sleeve (56), and arbor press, remove needle bearing (57) from one high speed weight (49). Repeat procedure for other high speed weight. Using an arbor press, remove carrier shaft (58) from weight carrier (51) by placing spline end into a sleeve (59) having a one inch hole. Remove retaining clip (60) and flat washer (61 ) from differential lever pin (62) and remove operating lever connecting link (63). Remove retaining clip (64) and flat washer (65) from operating lever pin (66). Remove differential lever (67) from operating lever (68). If damaged, remove pin (62) from differential lever (67). For model 7083-7395 only, remove two springs (69) and retainer clips (70). Separate governor links (71 and 72) and remove pin (73). 4-252