TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 356 of 670
TM9-2815-202-34 4-42. GOVERNOR REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly INITIAL SETUP MODELS 7083-7395 7083-7398 TOOLS AND SPECIAL TOOLS General mechanics tool kit (App B, Item 96) Governor cover bushing remover (App B, Item 78) Governor cover bearing installer (App B, Item 77) Governor cover bushing installer (App B, Item 53) Torque wrench (App B, Item 101) MANDATORY REPLACEMENT PARTS 1 Seal ring (App F, Item 131) 1 Seal ring (App F, Item 132) 2 Lockwashers (App F, Item 92) 2 Gaskets (App F, Item 78) 1 Seal ring (App F,ltem 135) 1 Gasket (App F,ltem 82) 1 Key washer (App F, Item 165) 1 Expansion plug (App F, Item 113) EXPENDABLE/DURABLE SUPPLIES Grease (App C, Item 22) Sealant (App C, Item 40) Engine oil (App C, Item 16) Cleaning solvent (App C, Item10) Bolt 5/1 6-24 x 3 (App C, Item 4) Sealant (App C, Item 38) EQUIPMENT CONDITION Para Description 4-17 Throttle control rods removed 4-18 Governor removed from blower a. Disassembly ● ● NOTE Before and during disassembly of governor, clean entire unit and visually inspect for worn or damaged parts which may be repaired or replaced without complete disassembly. If remote control levers are on governor cover, remove prior to disassembly of cover. (1) Remove eight bolts (1) securing governor cover (2) to governor (3). Remove cover and gasket (4). Discard gasket. 4-248