TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 255 of 670
TABLE 4-5. TM 9-2815-202-34 NOTE A new standard size cylinder liner is also classified as #1 (stamped below flange), #2 (stamped above ports), #3 (stamped below ports), or #4 (stamped between ports and flange). (1) Before installing liner in used cylinder (2) After honing block bore, check bore measurements to determine if standard ■ liner (Classification #1, #2, #3 or #4) can be used. A push fit between liner and block is desirable. If a push fit cannot be obtained, block must be bored to receive an oversize liner. block, always lightly hone block bore (Para 4-36). Change 1 4-149