TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 218 of 670
TM9-2815=202-34 4-30. CYLINDER BLOCK END PLATES REPLACEMENT Thistaskcovers: a. Removal b. Cleaning/Inspection c. Repair d. Installation . . INITIAL SETUP MODELS EXPENDABLE/DURABLE SUPPLIES ■ All TOOLS AND SPECIAL TOOLS Gasket nonhardening cement (App C, Item 39) Cleaning solvent (App C, Item 10) EQUIPMENT CONDITION General mechanics tool kit (App B, Item 96) Torque wrench (App B, Item 101) MANDATORY REPLACEMENT PARTS 2 Lockwashers (App F, Item 95) 13 Lockwashers (App F,ltem 93) 1 Gasket (App F,ltem 22) 1 Gasket (App F,ltem 43) 1 Gasket (App F, Item 67) Para Description 4-5 Fuel strainer bracket removed (7083-7395 and 7083-7398) 4-19 Blower drive-support removed 4-25 Idler gear removed 4-29 Camshaft and camshaft end bearings removed a. Removal (1) Front End Plate NOTE ■ Models 7083-7391, 7083-7396, and 7083-7399 require removal of two bolts (1) and two Iockwashers (2). (a) Remove bolt (1) and lockwasher (2) from end plate (3). Discard Iockwasher. NOTE ■ Models 7083-7391, 7083-7396, and 7083-7399 require five bolts (4) and five Iockwashers (5). (b) Remove four bolts (4) and four Iockwashers (5) from end plate. Discard Iockwashers. (c) Remove end plate (3) and gaskets (6 and 7) from cylinder block (8). Discard gaskets. (d) If required, remove screw insert (9) by pressing from end plate. Support end plate on a flat surface when removing insert to prevent warping or bending. f 1 . 4-116 Change 1