TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 199 of 670
TM 9-2815-202-34 e. Installation (1) Place injector control tube assembly (11) on cylinder head and install four bolts (7) through end brackets (8) and into cylinder head. Tighten bolts finger tight. Insure ball end of injector rack control lever engages in slot of injector control rack. Torque bolts (7) to 10-12 Ib-ft (14-16 N-m). (2) Check control tube to be sure it is free in brackets. If necessary, tap control tube lightly to aline bearing in brackets. NOTE Steps (3) and (4) for throttle delay assembly only applies to models 7083-7395 and 7083-7396. (3) (4) Slide throttle delay piston and linkage assembly (5) in bore of housing (6), Place U-bolt (3) around control tube and through bracket (4). Secure in position with two nuts (1) and two Iockwashers (2). Tighten nuts to 7-9 Ib-ft (9~12 N-m). END OF TASK FOLLOW-ON MAINTENANCE Para Description 4-17 Connect fuel control rods 4-11 Install rocker arm covers 4-97