TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 198 of 670
TM 9-2815-202-34 (2) Right bank injector control tube (a) Install three control levers (9) and three right hand helix yield springs (14) on control tube (16). Control lever must face front of control tube. (b) (c) (d) Install left hand helix yield spring (15) and control lever (9) on control tube (16). Control lever must face front of control tube. Attach curled end of four yield springs (14 and 15) to four control levers (9) and roll springs into notch or slots in control tube (16). Turn four adjusting screws (13) with four nuts (12) into slots far enough to position levers on control tube. Install control tube return spring (17) and bracket (8) at rear of control tube (16). Attach curled end of return spring to control lever and extended end of spring behind bracket. (3) Throttle delay assembly (a) Connect link (20) to piston (22) with pin (21). (b) Connect link (20) to bracket (4) with pin (19) and cotter pin (18). 4-96