TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 197 of 670
TM 9-2815-202-34 c. Cleanlng/inspection WARNING Compressed air used for cleaning purposes will not exceed 30 psi. Use only with effective chip guarding and personal protective equipment (goggles/ shield, gloves, etc). (1) Wash components with fuel oil and dry with compressed air. (2) Inspect components for excessive wear, cracks, or damage and replace if necessary. d. Assembly (1) Left bank injector control tube (a) (b) (c) (d) (e) (f) Install return spring (17) on control tube (16) and against front bracket (8). Install control lever (9) and left hand helix yield spring (15) on control tube (16). Control lever must face rear of control tube. Install three right hand helix yield springs (14) and three control levers (9) on control tube (16). Control levers must face rear of control tube. Attach curled end of four yield springs (14 and 15) to four control levers (9) and roll yield springs into notch or slots in control tube (16). Turn four adjusting screws (13) with four nuts (12) into slots far enough to position levers on control tube. Attach curled end of control tube return spring (17) to control lever (9) and extended end of spring behind front bracket (8). Install bracket (8) to rear of control tube (16). 4-95