TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 182 of 670
TM 9-2815-202-34 4-24. FLYWHEEL HOUSING REPLACEMENT This task covers: a. Removal b. Cleaning/Inspection c. -Installation INITIAL SETUP MODELS EXPENDABLE/DURABLE SUPPLIES All Engine oil (App C, Item 16) Grease (App C, Item 22) Cleaning solvent (App C, Item 10) Nonhardening sealant (App C, 39) TOOLS AND SPECIAL TOOLS General Mechanics Tool Kit (App B, Item 96) Torque wrench (App B, Item 101) Guide studs (App B, Item 86) Multiple sling (App B, Item 83) MANDATORY REPLACEMENT PARTS 21 Lockwashers (App F,ltem 93) 8 Lockwashers (App F,ltem 95) 1 Gasket (App F, Item 66) 2 Gasket (App F, Item 25) 2 Gasket (App F, Item 26) 1 Copper washer (App F, Item 163) EQUIPMENT CONDITION Para Description 4-2 Turbocharger mounting bracket removed (7083-7395) 4-19 Blower drive removed 4-20 Oil pan removed 4-22 Flywheel removed 4-23 Rear oil seal removed 6-4 Exhaust manifold and tube removed (7083-7398) 6-16 Crankcase breather removed a. Removal NOTE When removing flywheel housing bolts, note location of various size bolts and washers so they may be reinstalled in their proper location. (1) Install two eye bolts (1) to top of flywheel housing (2). Attach multiple sling (3) to eye bolts. NOTE Effective after engine number 8VA-349268, bolt (4) and flat washer (5) replaced three bolts (6) and three flat washers (7) on left side of flywheel housing. (2) Remove bolt (4), flat washer (5), three bolts (6), three flat washers (7), six bolts (8), and six flat washers (9) from bell of flywheel housing. 4-80 Change 1