TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 148 of 670
TM 9-2815-202-34 4-13. AIR INLET HOUSING REPLACEMENT This task covers: a. Removal b. Cleaning/Inspection c. Installation INITIAL SETUP MODELS EXPENDABLE/DURABLE SUPPLIES 7083-7395 7083-7396 Cleaning solvent (App C, Item 10) 7083-7398 7083-7399 EQUIPMENT CONDITION TOOLS AND SPECIAL TOOLS Para Description General mechanics tool kit (App B, Item 96) 4-2 Air inlet tube removed (7083-7395) Torque wrench (App B, Item 101) 4-10 Air box heater removed (7083-7395 and 7083-7396) I 5-2 Air inlet tube removed (7083-7396) MANDATORY REPLACEMENT PARTS 6-3 Air inlet tube removed (7083-7398) 3 Lockwashers (App F, Item 93) 1 Gasket (App F, Item 23) a. Removal (1) Remove three bolts (1), three flat washers (2), and three Iockwashers (3) securing air inlet housing (4) and gasket (5) to blower. Remove air inlet housing and gasket. Discard Iockwashers and gasket. NOTE For models 7395 and 7398 only. (2) If necessary, remove pipe plugs (6 and 7) from air inlet housing (4). b. Cleaning/Inspection WARNING Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes. Don’t breathe vapors. Do not use near open flames or excessive heat. The flash point is 100 o F-138 o F (38°-50 o C). If you become dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made, wash your eyes with water and get medical aid immediately. (1) Clean air inlet housing with cleaning solvent. 4-46 Change 1