TM-9-2815-202-34 Technical Manual for 8V71T Engines for M109 Howitzer Download
Page 112 of 670
TM 9-2815-202-34 4-5. FUEL STRAINER REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP MODELS MANDATORY REPLACEMENT PARTS 7083-7395 7083-7398 4 Lockwashers (App F, ltem 93) 1 Filter element Kit (App F, Item 16) 1 Flat washer TOOLS AND SPECIAL TOOLS 1 Filter element 1 Seal General mechanics tooI kit (App B, Item 96) a. Removal (1) (2) (3) (4) (5) (6) (7) (8) Remove bolt (1) and flat washer (2) securing fuel strainer canister (3) to strainer head (4). Remove canister and discard flat washer. Remove strainer element (5) from canister and remove seal (6) from strainer head. Discard element and seal. Remove bolt (7) and flat washer (8) from clip (9) and reinstall in water pump (10). Disconnect fuel supply line (11 ) at elbow connection (12) on fuel pump (13) and at tee fitting (14) on fuel strainer head (4). Remove fuel supply line (11). On model 7083-7398 only, disconnect air heater fuel supply line (15) at elbow on tee fitting (14). Remove two bolts (16), two Iockwashers (17), and two nuts (18) securing fuel strainer head (4) to mounting bracket (19). Remove fuel strainer head and discard Iockwashers. Remove two bolts (20), two Iockwashers (21), bolt (22), flat washer (23), and spacer (24) securing mounting bracket (19) to front of engine. Discard Iockwashers. Remove mounting bracket (19). b. Installation (1) Install bolt (22), flat washer (23), spacer (24), two bolts (20), and two Iockwashers (21) securing mounting bracket (19) to front of engine. (2) Install two bolts (16), two Iockwashers (17), and two nuts(18) securing fuel strainer head (4) to mounting bracket (19). 4-10