Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download

Page 222 of 323

*C2 CHAP 5, SEC XXXIII ASSEMBLY PAR 228, STEPS 19-22 Figure 346 (Step 19) Position torque converter assembly (A) on the assembly table, leveling it on wooden blocks (B). Install two 3/8-24 headless guide bolts (C) in assembly (A). Using sling (D), lower input transfer gear housing assembly (E) onto converter assembly (A). After installation, level housing assembly (E) with wooden blocks. Figure 347 (Step 20) Remove headless guide bolts. Install torque converter bearing cover (A) and gasket (B). 190 Figure 348 (Step 21) Install eight 3/8-24 x 2-1/4 bolts (A) and lock washers (B) to retain converter bearing cover (C). Using a 9/16-inch wrench, torque bolts to 33-40 pound-feet. Figure 349 (Step 22) Install transfer idler cluster gear spindle lock strap (A), lock strip (B) and two 3/8-16 x 1 bolts (C). Using a 9/16-inch wrench, torque bolts to 26-32 pound-feet. Bend corners of strip (B) against bolt heads.