TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 219 of 323
*C2 CHAP 5, SEC XXXIII ASSEMBLY PAR 228-229 Figure 354 (Step 27) Install engine coupling shaft (A). Install two 7/16-14 x 5-1/4 (B), four 7/16-14 x 6 (C) and four 7/16-14 x 1-1/2 converter housing-to- input transfer housing bolts (D) with lock washers. Using a 5/8-inch wrench, torque bolts to 42-50 pound-feet. Figure 355 (Step 28) Remove brake inspection covers (A) which were temporarily installed. Refer to sec. XXXIV, par. 234 for a final brake adjustment. Install gaskets (B) and covers (A). Secure covers with twelve 3/8-16 x 1-1/8 bolts (C) with lock washers. Using a 9/16-inch wrench, torque bolts to 26-32 pound-feet. 229. ASSEMBLY STEPS – LEFT- AND RIGHT-OUTPUT DRIVE ASSEMBLIES Figure 356 (Step 1) Install gasket (A) and sleeve (B) onto output shaft assembly (C). Using sling (D), install output drive housing (E). Figure 357 (Step 2) Install eight 7/16-20 x 1-1/4 bolts (A). Using a 5/8-inch wrench, torque bolts to 50-60 pound-feet. Install lock wire (B) through bolts (A). 192