TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 212 of 323
CHAP 5, SEC XXXIII ASSEMBLY PAR 227, STEPS 67-70 Figure 306 (Step 67) Install snap ring (A). Install output oil pump drive gear (B), flat side out. Figure 307 (Step 68) Install gasket (A) on left-output support as- sembly (B). Install support assembly. Figure 308 (Step 69) Install lifting bracket (A), three 7/16-14 x 1-3/4 (B) and ten 7/16-14 x 1-1/2 bolts (C) with lock washers. Using a 5/8-inch wrench, torque bolts to 42-50 pound-feet. Figure 309 (Step 70) Install left-output coupling (A). Install lock plate (B) and 3/4-16 x 2-3/4 bolt (C), finger tight. 180