TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 201 of 323
PAR 227, STEPS 23-26 ASSEMBLY CHAP 5, SEC XXXIII Figure 262 (Step 23) Install thrust washer (A) and sleeve (B) onto low-range carrier and shaft assembly (C). Alternately install three external- (D) and three internal-splined (E), reverse-range clutch plates, beginning with an external- splined plate (D). Figure 263 (Step 24) Install reverse-range ring gear assembly (A), chamfered side up. Install an external-splined (B) and the remaining internal-splined (C), reverse-range clutch plate. Aline the tangs of plates (B) and center the plates carefully. Figure 264 (Step 25) Using sling (A) and two 7/16-14 bolts (B) and nuts (C), install reverse-range carrier and support housing assembly (D). Figure 265 (Step 26) Install two 3/8-16 screws (A) that retain reverse-range carrier support housing (B). Tighten screws evenly until housing (B) is firmly seated. 169