TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 183 of 323
PAR 191 LOW PLANETARY AND OUTPUT SHAFT REBUILD CHAP 5, SEC XXV Figure 221. Alining pinion and component parts in planetary carrier Figure 219. Removing spindle lock pin Figure 222. Installing planetary carrier spindle Figure 220. Removing planetary carrier spindle e. Insert alining tool 8351209, with wash- er and spacer, into the pinion. f. Install a spacer 29 or 32 (fig. 376, fold-out 5) over the alining tool, then a thrust washer 28 or 33. Remove the alining tool. g. Slide pinion 30 and its related parts into location in carrier 27 from which it was removed. Using alining tool 8351209, aline the pinion, washers and rollers. Refer to fig. 221. Remove the alining tool. h. Install spindle replacer 8351266 on 151