TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 172 of 323
CHAP 5, SEC XIX LEFT, RIGHT STEER PLANETARIES REBUILD PAR 158-160 Figure 203. Removing (or installing) steer planetary carrier ring gear assembly g. Using a hammer and punch, remove four steer planetary carrier spindle lock pins (fig. 204). h. Using replacer plate 8351492, re- placer 8351266 and a suitable press tool, press four spindles from the planetary shaft and car- rier assembly (fig. 205). i. Remove the steer planetary carrier pinions (6, fig. 378, fold-out 7), roller bear- ings 7, spacers 5 and 8, and thrust washers 4 and 9 from carrier 3. 159. CLEANING Refer to par. 71 for cleaning recommen- dations. 160. INSPECTION AND REPAIR Refer to par. 72 for general inspection and repair recommendations. Repair and re- build points of measurement for fits, clear- ances and wear limits are indicated by small, lower case letters in figs. 378 and 380, fold- outs 7 and 9. Refer to pars. 241 and 243 for wear limits information. 140 Figure 204. Removing (or installing) spindle lock pin Figure 205. Removing steer planetary carrier and shaft assembly spindle